Looking for:
Microsoft configuration manager windows 10
OS installation will complete after 5 to 10 minutes and then the VM will reboot automatically. Allow the system to boot normally, don’t press a key. The process is fully automated. Other system restarts will occur to complete updating and preparing the OS.
Setup will complete the following procedures:. This step requires from 30 minutes to 2 hours, depending on the speed of the Hyper-V host and your network’s download speed. After some time, you’ll have a Windows 10 Enterprise x64 image that is fully patched and has run through Sysprep.
Make sure there’s no space at the end of the location or you’ll get an error. Select Windows 10 Enterprise x64 and monitor the status of content distribution until it’s successful and no longer in progress. Refresh the view with the F5 key or by right-clicking Windows 10 Enterprise x64 and clicking Refresh. Processing of the image on the site server can take several minutes. This action adds a new step immediately after Set Status 5. In this case, skip the first four steps below and begin with step 5 to edit CustomSettings.
Select the Monitoring tab, select the Enable monitoring for this deployment share checkbox, and then select OK. For example, the following option will capture settings from all user accounts:. In this first deployment scenario, you’ll deploy Windows 10 using PXE. This scenario creates a new computer that doesn’t have any migrated users or settings.
In the Task Sequence Wizard, provide the password: pass word1 , and then select Next. A command prompt will open. At the command prompt, type explorer. The smsts. Depending on the deployment phase, the smsts. Note: If a reboot is pending on the client, the reboot will be blocked as long as the command window is open. In the explorer window, select Tools and then select Map Network Drive. Don’t map a network drive at this time. If you need to save the smsts. Select Next to continue with the deployment.
The task sequence will require several minutes to complete. The task sequence will:. Right-click Start , select Run , type control appwiz. This feature is included in the reference image. The following two procedures 1 Replace a client with Windows 10 and 2 Refresh a client with Windows 10 have been exchanged in their order in this guide compared to the previous version.
If this is your first time going through this guide, you won’t notice any change, but if you have tried the guide previously then this change should make it simpler to complete.
Before you start this section, you can delete computer objects from Active Directory that were created as part of previous deployment procedures. There should be at least two computer accounts present in the contoso.
It’s not required to delete the stale entries, this action is only done to remove clutter. In the replace procedure, PC1 won’t be migrated to a new OS. It’s simplest to perform this procedure before performing the refresh procedure. After you refresh PC1, the OS will be new. The next replace procedure doesn’t install a new OS on PC1 but rather performs a side-by-side migration of PC1 and another computer PC4 , to copy users and settings from PC1 to the new computer. Select OK and then select Next to continue.
On the Settings Package page, browse and select the Windows 10 x64 Settings package. If an error is displayed at this stage, it can be caused by a corrupt MDT integration. This VM represents a new computer that will replace PC1. In a real-world scenario, you must determine the MAC address of the new computer. Verify that the PC1 VM is running and in its original state, which was saved as a checkpoint and then restored in Deploy Windows 10 in a test lab using Microsoft Deployment Toolkit.
If you haven’t already saved a checkpoint for PC1, then do it now. If you don’t see the computer account for PC1, select Refresh in the upper right corner of the console. The Client column indicates that the Configuration Manager client isn’t currently installed.
This procedure will be carried out next. This command requires an elevated command prompt , not an elevated Windows PowerShell prompt. It might be necessary to manually remove these settings if they are present.
For more information, see Manual removal of the Configuration Manager client. The co-management dashboard helps you review machines that are co-managed in your environment. The graphs can help identify devices that might need attention. For more information, see How to monitor co-management.
Learn more about immediate value and getting started with co-management. Tutorial: Enable co-management for existing Configuration Manager clients. Skip to main content. This browser is no longer supported. Download Microsoft Edge More info.
Table of contents Exit focus mode. Table of contents. What is co-management? Note When you concurrently manage devices with both Configuration Manager and Microsoft Intune, this configuration is called co-management.
Note Co-management by itself isn’t a solution to manage remotely connected Windows systems. Tip Make sure you assign an Intune license to the account that you use to sign in to your tenant. Note Devices that are only registered with Azure AD aren’t supported with co-management. Tip As we talk with our customers that are using Microsoft Endpoint Manager to deploy, manage, and secure their client devices, we often get questions regarding co-managing devices and hybrid Azure Active Directory Azure AD joined devices.
Submit and view feedback for This product This page. Get started with Microsoft Defender for Identity. Microsoft Identity Manager offers a comprehensive solution for managing identities, credentials, and identity-based access policies across heterogeneous environments. Get started with Identity Manager Get started for free. Supporting products. For more information, see Support for Configuration Manager current branch versions.
The best way to stay current with Windows 10 is to stay current with Configuration Manager. For more information, see Configuration Manager and Windows as a Service. This information supplements Supported operating systems for clients and devices. If you use the long-term servicing branch of Configuration Manager, see Supported configurations for the long-term servicing branch.
The following table lists the versions of Windows 10 that you can use as a client with different versions of Configuration Manager. For more information on Windows lifecycle, see the Windows lifecycle fact sheet and Windows 10 release information. Support for Windows 10 semi-annual channel versions includes the following editions: Enterprise, Pro, Education, Pro Education, and Pro for Workstation. OS deployment media shows the build number from the base version.
For example, When Windows is installed, it applies an enablement package, which updates the build number to what’s in the above table.
You can use the revision ID to distinguish the media:.
Support for Windows 10 – Configuration Manager | Microsoft Docs
Configuration Manager attempts to provide support as a client for each new Windows 10 version as soon as possible after it becomes available. On SRV1, select Start, type configuration manager, right-click Configuration Manager Console, and then select Pin to Taskbar. Select Desktop. Description Microsoft Endpoint Configuration Manager helps IT manage PCs and servers, keeping software up-to-date, setting configuration and security.
Microsoft configuration manager windows 10
After you install Configuration Manager, use the Configuration Manager console to configure sites and clients, and to run and monitor management. Configuration Manager attempts to provide support as a client for each new Windows 10 version as soon as possible after it becomes available.